Product Code ::RXSOL-70-7000-210
Categories: Fuel Treatment-70
Product Short Description: Blend of 15 % methanol and 85 % Gasoline.
Product Description:

Fuel M15 RXSOL methanol gasoline additive is a new type of alcohol-based additive, which is strictly developed and prepared by certain production technologies. By using these fuels there is no need of car modification and they can be directly used instead of gasoline, which have the same burning qualities as that of national standard gasoline.

Product Application:

Use as fuel

Product Dose:
Product Note:

Future and Benefit :: 

Unique co-solvent technique: By using this RXSOL additive, alcohols can be soluble in oils such national standard gasoline, ethanol gasoline, direct distilled gasoline, anphtha, light oil without phase separation and emulsification, which has great stability.
 
Good water resistance performance: It can guard against moisture in air during preparation, transportation, storage and injection which are good for its production and use.
 
Adaptation of ambient environment: It can be prepared and used under temperature of -40℃--40℃, and there is no phase separation in cold temperature. Vehicle starts easily and there is air lock in high temperature. 
 
Excellent heat value improvement technology: Through denaturing methanol to improve its heat value and at the same time to enhance combustion efficiency and heat value by taking advantage of methanol’s characteristic of latent heat of evaporation. It can improve engine’s dynamics and lower vehicle’s fuel consumption which enables this kind of fuel to have the same power as that of national standard gasoline.
 
Infinitely solubility, anti-corrosion & swelling: Finished product of methanol gasoline is infinitely soluble in national standard gasoline, ethanol gasoline and non-standard gasoline without car modification or no need of adding any other equipment. It can be burnt directly without corrode and swell any part of engine.
 
Advantege ::
 
Using M15 fuel in gasoline cars and vans without any modifications is reducing up to 40% of HC emissions, 20% of Particles and 2% of CO2 emissions compared to normal gasoline.
 
1) Unique co-solvent technique: By using Tiande additive, alcohols can be soluble in oils such national standard gasoline, ethanol gasoline, direct distilled gasoline, anphtha, light oil without phase separation and emulsification, which has great stability.
 
2) Good water resistance performance: It can guard against moisture in air during preparation, transportation, storage and injection which are good for its production and use.
 
3) Adaptation of ambient environment: It can be prepared and used under temperature of -40℃--40℃, and there is no phase separation in cold temperature. Vehicle starts easily and there is air lock in high temperature. 
 
4) Excellent heat value improvement technology: Through denaturing methanol to improve its heat value and at the same time to enhance combustion efficiency and heat value by taking advantage of methanol’s characteristic of latent heat of evaporation. It can improve engine’s dynamics and lower vehicle’s fuel consumption which enables this kind of fuel to have the same power as that of national standard gasoline.
 
5) Infinitely solubility, anti-corrosion & swelling: Finished product of methanol gasoline is infinitely soluble in national standard gasoline, ethanol gasoline and non-standard gasoline without car modification or no need of adding any other equipment. It can be burnt directly without corrode and swell any part of engine.
 
6) Large proportion alternative, small proportion emission, energy-saving and environment-protection: We can mix denatured methanol in large proportion into national standard gasoline. During the burning process, through the agency of ignition accelerator, it inhibits the produce and emission of methanol gas from unburned methanol when you cold start the engine. Poisonous content such as sulphur, benzol and arene lowers up to 20%--70%. Poisonous gas such as CO, HC, and NO in exhaust gas emission reduces 40%--95%.
 
Preparation method of methanol gasoline: 
 
 (1) Put  methanol gasoline additive into methanol in a certain ratio. Different model is of different ratio.After evenly blending, we can get denatured methanol.
1) Unique co-solvent technique: By using Tiande additive, alcohols can be soluble in oils such national standard gasoline, ethanol gasoline, direct distilled gasoline, anphtha, light oil without phase separation and emulsification, which has great stability.
 
2) Good water resistance performance: It can guard against moisture in air during preparation, transportation, storage and injection which are good for its production and use.
 
3) Adaptation of ambient environment: It can be prepared and used under temperature of -40℃--40℃, and there is no phase separation in cold temperature. Vehicle starts easily and there is air lock in high temperature. 
 
4) Excellent heat value improvement technology: Through denaturing methanol to improve its heat value and at the same time to enhance combustion efficiency and heat value by taking advantage of methanol’s characteristic of latent heat of evaporation. It can improve engine’s dynamics and lower vehicle’s fuel consumption which enables this kind of fuel to have the same power as that of national standard gasoline.
 
5) Infinitely solubility, anti-corrosion & swelling: Finished product of methanol gasoline is infinitely soluble in national standard gasoline, ethanol gasoline and non-standard gasoline without car modification or no need of adding any other equipment. It can be burnt directly without corrode and swell any part of engine.
 
6) Large proportion alternative, small proportion emission, energy-saving and environment-protection: We can mix denatured methanol in large proportion into national standard gasoline. During the burning process, through the agency of ignition accelerator, it inhibits the produce and emission of methanol gas from unburned methanol when you cold start the engine. Poisonous content such as sulphur, benzol and arene lowers up to 20%--70%. Poisonous gas such as CO, HC, and NO in exhaust gas emission reduces 40%--95%.
 
Preparation method of methanol gasoline: 
 
 (1) Put  methanol gasoline additive into methanol in a certain ratio. Different model is of different ratio.After evenly blending, we can get denatured methanol.
Hashtag: #MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant #Demulsifier #WaterlessHandCleaner #AirC
Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates